Key points are not available for this paper at this time.
To date, lithium–ion batteries (LIBs) are considered one of the most promising and market-leading energy storage systems due to their high theoretical capacity and energy density. However, poor thermal and cyclic stability, low electrolyte uptake, and the possibility for frequent short circuits of typical separators and evolution of several gases during long cycle operation pose several problems for LIBs. Metal-organic frameworks (MOFs) have attracted widespread interest as a promising material for improving the cycle stability and safety of rechargeable batteries due to their inherent surface and structural properties such as high specific surface area, high porosity, and ionic conductivity. In this work, the aim is to provide detailed descriptions of the synthesis routes and parameters for obtaining various MOFs such as Zr-MOF-808 and Ni-MOF-74 nanoparticles and the fabrication of those MOF-integrated separators. To optimize the crystallinity, morphological and compositional characteristics, and several material characterizations such as XRD, SEM, and EDX have been applied. Afterwards, the synthesized MOF-integrated glass fiber (GF) separators have been developed for lithium–ion battery (LIB) applications. To investigate the electrochemical performance and the effect of MOF integration into the separators, electrochemical studies in the form of galvanostatic charge–discharge (GCD), electrochemical impedance spectroscopy (EIS) have been evaluated by preparing CR2032-type half-coin cells. This MOFs-integrated GF-separators and synthesized LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode materials-based coin cell LIB exhibited higher cycle stability than bare GF-separator based LIB. This novel approach and extensive research suggest that development of MOF-integrated separators could significantly improve cycle stability by reducing the internal cell degradation for next generation energy storage devices.
Ray et al. (Tue,) studied this question.