Femtosecond Laser-Induced Graphene Modified with Platinum Nanoparticles for Advanced Multifunctional Sensing

Flexible sensors are important for wearable health monitoring, strain detection, and temperature sensing because of their mechanical flexibility and functional versatility. Here, a femtosecond laser direct scanning method was used to fabricate porous laser-induced graphene (LIG) and further modify it with platinum nanoparticles (PtNPs), forming Pt/LIG. This mask-free and rapid process enables simultaneous patterning and functionalization of flexible sensors. The introduction of PtNPs improves the electron transport and surface adsorption properties of LIG. As a result, the sheet resistance of Pt/LIG is reduced to 2.41 Ω/sq, enhancing electrical conductivity and suitability for sensing applications. Based on this method, highly sensitive strain and temperature sensors were fabricated. The Pt/LIG strain sensor shows a ΔR/R0 of 1141.8 at a bending angle of 90°, about 213% higher than that of pristine LIG, with fast response and recovery times of 36 and 56 ms, respectively. The temperature sensitivity also improved by about 650%, with a temperature coefficient of resistance of 0.240%/°C, compared with −0.032%/°C for pristine LIG. Overall, this work provides a fast and precise strategy for fabricating nanoparticle–graphene composites for flexible electronics, wearable health monitoring, and environmental sensing.