Effects of Iron Shavings Addition on the Performance of AOA-SBR Biochemical System

To explore a new approach to reducing the use of external carbon sources and phosphorus removal chemicals in conventional wastewater treatment, this study developed an anaerobic–oxic–anoxic sequencing batch reactor (AOA-SBR) system (Rf) with iron shavings addition (180 g, 60 g/L), using a blank reactor (R0) as the control. Synthetic wastewater with a C/N ratio of 7.5 was used as the influent. The operating cycle of the AOA-SBR reactor consisted of a 120 min anaerobic phase, a 120 min aerobic phase, and a 60 min anoxic phase, with a hydraulic retention time (HRT) of 12 h. Results showed that the SVI30 of Rf remained at approximately 35 mL/g. The average removal efficiencies of TN and TP in Rf reached 70% and 96%, respectively, which were higher than those of the control. The addition of waste iron shavings improved sludge settleability and nitrogen and phosphorus removal performance of the biochemical system. Fe-C microelectrolysis significantly enriched Candidatus_Competibacter and Candidatus_Nitrocosmicus while inhibiting nitrite-oxidizing bacteria (NOB). This triggered persistent low-level nitrite accumulation within the system, diversified nitrogen-removal pathways, and ultimately improved the total nitrogen-removal efficiency. The extended anaerobic period in the anaerobic–oxic–anoxic (AOA) mode enriched phosphate-accumulating organisms, achieving synergistic chemical and biological phosphorus removal. This study provides a novel strategy for advanced wastewater treatment without external carbon sources or phosphorus additives.