The exploitation of deep coalbed methane is of great significance for easing China’s energy supply pressure and realizing the “Dual Carbon” goals. However, local grid refinement simulation methods for coalbed methane cannot well capture the characteristics of deep coalbed methane reservoirs, including strong stress sensitivity and high brittleness. To tackle this issue, this paper develops a novel numerical simulation approach dedicated to deep coalbed methane development. Integrated with the fluid–solid coupling effect in rock mechanics, this approach considers the interporosity flow between matrix pores and cleat fractures as well as that between cleat fractures and hydraulic fractures, and establishes a multi-dimensional coupled simulation framework on the basis of the dual-porosity single-permeability model and embedded discrete fracture model. Simulation results show that compared with the local grid refinement model, the daily gas production curve simulated by the proposed method is more consistent with the actual field curve. The local grid refinement method fails to accurately characterize the specific morphology of hydraulic fractures. The average relative error of the local grid refinement model reaches 25.61%, while that of the model in this paper is only 7.54%, representing an accuracy improvement of 18.07%. Sensitivity analysis draws the following conclusions: reservoir gas content is the dominant geological factor governing deep coalbed methane output, and raising reservoir gas content can boost cumulative gas production by 45.77%; hydraulic fracture length mainly affects gas production performance in the middle and late production stages, while fracture conductivity dominates early-stage productivity. This method can fully characterize the coupled flow behaviors of three types of media (matrix pores, cleat fractures and hydraulic fractures), and offers solid technical support for productivity forecasting and development scheme optimization of deep coalbed methane reservoirs.
Sun et al. (Wed,) studied this question.