Insight into the Nature of Nickel Active Sites on the NiAl2O4 Catalyst for Phenanthrene Hydrogenation Saturation

High Resolution Image Download MS PowerPoint Slide Hydrogenation saturation of phenanthrene (a typical component of coal tar) could not only improve the combustion performance of fuel oil, but also obtain the raw material for preparing high-energy-density fuel. Nickel-based catalysts have been considered promising catalysts for the hydrogenation saturation of phenanthrene due to their appealing capacity to activate phenanthrene molecules. However, the Ni derivation precursor greatly affects its hydrogenation activity. In this work, the NiAl 2 O 4 catalyst was obtained by the sol–gel method. Under the experimental conditions of temperature 300 °C, pressure 5 MPa, and WHSV 0.52 h –1, the phenanthrene conversion over NiAl 2 O 4 catalysts can be up to 99.7 and 93.9% for perhydrophenanthrene yield, while those of the traditional Ni/Al 2 O 3 catalysts are just up to 96.8 and 77.3%, respectively. Moreover, the TOF of phenanthrene hydrogenation of the NiAl 2 O 4 catalyst (3.01 × 10 –3 s –1 ) surpasses that of the traditional Ni/Al 2 O 3 catalyst (2.46 × 10 –3 s –1 ), which indicates that Ni derived from NiAl 2 O 4 has stronger phenanthrene hydrogenation activity. According to relevant characterizations, the superior hydrogenation performance of the NiAl 2 O 4 catalyst derives from the stronger H 2 adsorption and dissociation ability and the formation of an electron-deficient structure of active metal Ni, which contributes to the improved adsorption and activation of the polycyclic aromatic hydrocarbons.