Key points are not available for this paper at this time.
Abstract The practical application of lithium–sulfur (Li–S) batteries is gravely hampered by the dissolution and shuttle of lithium polysulfides. Herein, a zwitterionic polymer binder with both lithiophilicity and sulfophilicity is skillfully designed to realize a synergistic regulation of cations and anions through the strong interactions with lithium polysulfides. The cationic quaternary ammonium group within the polymeric zwitterion can immobilize polysulfide anions and block polysulfide migration, while the sulfonate anions preferably couple with lithium ion, thus facilitating ion transfer and promoting the polysulfides redox kinetics. The dynamic networks crosslinked by both hydrogen bonding and electrostatic interaction enable mechanically robust cathodes to withstand the volume variation and spontaneously repair cracks upon repeated lithiation/delithiation. Benefiting from these attributes, the Li–S coin cell using the zwitterionic polymer binder delivers a high initial discharge capacity of 1230.6 mAh g −1 at 0.2 C as well as an ultralow capacity decay rate of 0.03% per cycle over 600 cycles at 2 C. In Li–S pouch cell level, a high areal capacity of 6.6 mAh cm −2 after 50 cycles can be obtained under a sulfur loading of up to 8.5 mg cm −2 , demonstrating the potential of zwitterionic polymer binder for the further development of high‐performance Li–S batteries.
Wang et al. (Tue,) studied this question.