Key points are not available for this paper at this time.
Ru/C catalyst was used in hydrogenation of levulinic acid to produce γ-valerolactone. The conversion rate and the selectivity of levulinic acid to γ-valerolactone with Ru/C as catalyst were higher than those with Pd/C, Raney nickel, and Urushibara nickel. The optimum preparation conditions of γ-valerolactone by hydrogenation of levulinic acid catalyzed by Ru/C were as follows: temperature at 130 °C, hydrogen pressure at 1.2 MPa, dosage of catalyst at 5.0% (based on the mass fraction of levulinic acid), the solvent being methanol, and a reaction time of 160 min. The conversion rate of levulinic acid to γ-valerolactone was found to be 92%, and the selectivity of γ-valerolactone was 99%. The surface structure variations of the fresh and used catalysts were characterized by XRD and XPS. Furthermore, the reaction pathway for the hydrogenation of levulinic acid was proposed.
Yan et al. (2009) studied this question.