Key points are not available for this paper at this time.
Applicability of the finite element method (FEM) in predicting the effective transverse thermal conductivity of fiber reinforced composites is systematically studied. Four different boundary condition combinations representing the periodicity of the temperature field are employed for ideal composites having perfect bond between fiber and matrix. Both circular and square cross-section fibers are studied. Comparisons of present FEM results with available analytical and experimental results reveal that periodicity realized by prescribed temperatures yields most accurate results up to high fiber volume fractions. In composites with interfacial thermal barrier resistance the effective conductivity varies in a wide range depending on the interfacial conductance between fiber and matrix. Best fit with available experimental results is obtained for both circular and square fibers when the dimensionless interfacial conductance is about 30. By employing the modeling practice found successful in the cases for which analytical andlor experimental results exist, some typical combined effects of partial debonding and matrix cracking, for which no such results exist, are finally considered.
Islam et al. (Wed,) studied this question.