PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 1, 2010IEEE Transactions on Dielectrics and Electrical Insulation207 citations

Dielectric breakdown of polyimide films: Area, thickness and temperature dependence

View Full Paper
SDSombel DiahamSZSamir ZelmatMLM.L. Locatelli

Key Points

Key points are not available for this paper at this time.

Abstract

Changes in the dielectric breakdown field of polyimide (PI) films have been studied from 25 to 400°C under dc ramps. Both the area (from 0.0707 to 19.635 mm 2 ) and thickness (from 1.4 to 6.7 ¿m) dependences of the dielectric breakdown field have been carried out using the Weibull distribution function. The 63%-breakdown field value (i.e. the ¿-scale parameter) of PI shows a decrease with increasing area, thickness and temperature but always remains above 2 MV/cm. The ß-scale parameter of the distribution shows a typical decrease with increasing area, however, it exhibits an increase with increasing thickness. This 'curious' behavior is discussed on the basis of the percolation theory. No temperature-dependence is clearly observed. Moreover, physical interpretations are carried out using the pre-breakdown current analysis.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Diaham et al. (2010) studied this question.

synapsesocial.com/papers/6a5ea0239e99e7407a7e0f90https://doi.org/10.1109/tdei.2010.5411997
Ask AI
Helpful
Bookmark
Share
View Full Paper