Key points are not available for this paper at this time.
Abstract Thermoelectric (TE) materials have attracted significant attention because they can be used to directly harvest waste heat into electricity. Organic TE materials like poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) have advantages including high mechanical flexibility, low cost, and low intrinsic thermal conductivity. However, their TE properties are notably inferior to their inorganic counterparts. Here, PEDOT:PSS films with very high thermoelectric properties through the sequential treatments with H 2 SO 4 , water, and ethanol solution of tetrakis(dimethylamino)ethylene (TDAE) are reported for the first time. The PEDOT:PSS films can exhibit a Seebeck coefficient of 58.2 µV K −1 and electrical conductivity of 1552 S cm −1 , and the corresponding power factor is 526 µW m −1 K −2 . The water treatment prior to the TDAE solution treatment is crucial for the high TE properties of PEDOT:PSS films. Without the water treatment, the control PEDOT:PSS films exhibit a Seebeck coefficient of only 32.4 µV K −1 and electrical conductivity of 1124 S cm −1 , and the corresponding power factor is only 118 µW m −1 K −2 . The effect of the water treatment on the Seebeck coefficient is attributed to the swelling of PEDOT:PSS films, which facilitates the penetration of TDAE from solution into the polymer films and thus the reduction of PEDOT:PSS.
Xu et al. (Sun,) studied this question.