Key points are not available for this paper at this time.
The matrix effect refers to the change in the analytical signal caused by the matrix in which the sample is contained, as well as the impurities that are co-eluted with the target analyte. In crop sample analysis using LC–MS/MS, the matrix effect can affect the quantification results. Chinese chives are likely to exhibit a strong matrix effect when co-extracted with bifenthrin and butachlor due to the presence of phytochemicals and chlorophyll. A novel analytical method was developed to reduce the matrix effects of bifenthrin and butachlor to a negligible level in Chinese chives. The established method had a limit of quantitation of 0.005 mg/kg and correlation coefficients greater than 0.999 within the range of 0.005–0.5 mg/kg. Matrix effects were found to be negligible, with values ranging from −18.8% to 7.2% in four different sources of chives and two leafy vegetables. Compared to conventional analytical methods for the LOQ and matrix effect, the established method demonstrated improved performances. The analytical method was further applied in a residual study in chive fields. The active ingredient of butachlor 5 granule (GR) was not detected after soil admixture application, while that of bifenthrin 1 emulsifiable concentrate (EC) showed a range from 1.002 to 0.087 mg/kg after foliar spraying. The dissipation rate constant (k) of bifenthrin was determined to be 0.115, thus its half-life was calculated to be 6.0 days. From the results, PHI and safety use standards of both pesticides were suggested. The developed analytical method can be applied to accurately determine bifenthrin and butachlor residues in Chinese chives and provides a foundation for further research on the fate and behavior of these pesticides in the environment.
Kim et al. (Tue,) studied this question.