Key points are not available for this paper at this time.
Electrical properties of materials are critical to signal transmission and device performance. These properties are described by complex permittivity (ε*), comprising real (ε′) and imaginary (ε′) components, with loss tangent (ε′′/ε′) indicating energy dissipation as heat. Conventional methods for determining these parameters require precise sample dimensions, specialised instrumentation and stable environmentalconditions, making them costly and time-consuming. This study proposes a Deep Neural Network (DNN) framework as a non-destructive testing (NDT) method to predict dielectric properties of natural hardwood and softwood commonly used in Turkey”s wood industry. Data were obtained with waveguides, coaxial cables and a vector network analyser (VNA) using the microwave scattering technique. DNN predicts dielectric parameters based on frequency, density and wood type. Model performance was first evaluated using train, validation and test data, achieving mean absolute error (MAE), mean squared error (MSE) and root mean squared error (RMSE) values of 0.72, 1.82 and 1.08 respectively on prediction ε*. Validation on 2nd round of samples which contained new densities from different samples yielded errors of 1.76, 4.71 and 1.88. Results show strong alignment between predicted and measured values, confirming the DNN”s effectiveness for rapid, cost-efficient material characterization and qualty control in the wood-based products industry.
Mengüç et al. (Mon,) studied this question.