Key points are not available for this paper at this time.
High-quality fluorographene (FG) was prepared by solvothermal exfoliation of fluorinated graphite (F-graphite) through intercalation of acetonitrile and chloroform with low boiling points. High-yield production of FG was demonstrated by wrinkled few-layered structures with disordered edges and poor regularity along the stacking direction. X-ray photo electron spectroscopy (XPS) spectra indicated that the intercalation of chloroform led to the partial transformation from covalent C-F bonds to semi-ionic C-F bonds. A lithium primary battery (Li-battery) using a FG cathode exhibited a remarkable discharge rate performance because of good Li(+) diffusion and charge mobility through nanosheets. FG nanosheets exfoliated using chloroform showed a high specific capacity of 520 mA h g(-1) and a voltage platform of 2.18 V at a current density of 1 C, accompanied by a maximum power density of 4038 W kg(-1) at 3 C, which is almost four times higher than that of F-graphite. The results indicate that the solvothermal exfoliation using a low-boiling-point solvent is a facile, efficient and high-yield approach to prepare high-purity FG nanosheets for high-performance Li-batteries.
Sun et al. (Wed,) studied this question.