Key points are not available for this paper at this time.
This paper presents experimental measurements of the performance of a new film-cooling hole geometry—the con¯vergings¯lot-hole¯ or console. This novel, patented geometry has been designed to improve the heat transfer and aerodynamic loss performance of turbine vane and rotor blade cooling systems. The physical principles embodied in the new hole design are described, and a typical example of the console geometry is presented. The cooling performance of a single row of consoles was compared experimentally with that of typical 35-deg cylindrical and fan-shaped holes and a slot, on a large-scale, flat-plate model at engine representative Reynolds numbers in a low-speed tunnel with ambient temperature main flow. The hole throat area per unit width is matched for all four hole geometries. By independently varying the temperature of the heated coolant and the heat flux from an electrically heated, thermally insulated, constant heat flux surface, both the heat transfer coefficient and the adiabatic cooling effectiveness were deduced from digital photographs of the color play of narrow-band thermochromic liquid crystals on the model surface. A comparative measurement of the aerodynamic losses associated with each of the four film-cooling geometries was made by traversing the boundary layer at the downstream end of the flat plate. The promising heat transfer and aerodynamic performance of the console geometry have justified further experiments on an engine representative nozzle guide vane in a transonic annular cascade presented in Part 2 of this paper.
Sargison et al. (Mon,) studied this question.