Key points are not available for this paper at this time.
In this study, we investigate the mechanical energy absorption performance of reusable 3D-printed honeycomb structures fabricated using fused deposition modeling with three thermoplastic polyurethane variants: TPU 70A, TPU 85A, and TPU 95A. Prior to manufacturing, the mechanical properties of the TPU filaments were analyzed as a function of printing temperature to optimize tensile strength and layer adhesion. Four honeycomb configurations, including hexagonal and circular cell geometries, both with and without a 30° twist, were subjected to out-of-plane compression testing to evaluate energy absorption efficiency, specific energy absorption, and crushing load efficiency. The highest energy absorption efficiency, 47%, was achieved by the hexagonal honeycomb structure fabricated from TPU 95A, surpassing the expected values for expanded polystyrene and approaching the performance reported for high-cost advanced lattice structures. Additionally, twisted honeycomb configurations exhibited improved crushing load efficiency values (up to 73.5%), indicating better stress distribution and enhanced reusability. Despite variations in absorbed energy, TPU 95A demonstrated the best balance of elasticity, structural integrity, and reusability across multiple compression cycles. These findings suggest that TPU-based honeycomb structures could provide a viable, cost-effective alternative for energy-absorbing applications in impact protection systems, automotive safety, and sports equipment.
Bustihan et al. (Sun,) studied this question.