Key points are not available for this paper at this time.
A large amount of industrial solid waste is generated from industrial activities worldwide. One such waste is marble waste, a waste generated from quarries which is generated in larger amount which needs attention. It is proved that this waste has a significant impact both on the people health and on the environment. Hence, research works are directed towards addressing usage of waste marble power, the aim of this experimental investigation is to study the usability of sand obtained by crushing marble waste (MWS) on the mixing of lightweight concrete based on expanded perlite aggregate (EPA). First, the mechanical, chemical, and physical properties of marble waste sand and expanded perlite aggregate were determined after which different mixtures of concrete are prepared by varying the percentage of EPA (0, 20, 40, 60, 80, and 100%), in order to find the optimum mixture focussing on obtaining best hydraulic properties. Also, in this work, the thermal and acoustic properties (thermal conductivity, thermal diffusivity, specific heat capacity and sound reduction index at different frequencies) of the tested concrete samples were investigated. Results shows that it is possible to obtain thermal and acoustic insulation lightweight concrete by using sand obtained by crushing marble wastes. Also, addition of more than 20% of EPA aggregate in concrete, develops a thermal insulating lightweight concrete which possess capacity to store heat and produce better thermal performance. Concrete blend with a percentage of more than of 20% of EPA aggregate can be placed in the category of acoustic insulation lightweight concrete. In summary, cement based on MWs and EPA provides better workability and energy saving qualities, which are economical and environmentally beneficial and may result in decreased construction budget and improve a long-term raw materials sustainability.
Benjeddou et al. (Sun,) studied this question.