Key points are not available for this paper at this time.
Abstract The rechargeable zinc–air battery (ZAB) is a promising energy storage technology owing to its high energy density and safe aqueous electrolyte, but there is a significant performance bottleneck. Generally, cathode reactions only occur at multiphase interfaces, where the electrocatalytic active sites can participate in redox reactions effectively. In the conventional air cathode, the 2D multiphase interface on the surface of the gas diffusion layer (GDL) inevitably results in an insufficient amount of active sites and poor interfacial contact, leading to sluggish reaction kinetics. To address this problem, a 3D multiphase interface strategy is proposed to extend the reactive interface into the interior of the GDL. Based on this concept, an asymmetric air cathode is designed to increase the accessible active sites, accelerate mass transfer, and generate a dynamically stabilized reactive interface. With a NiFe layered‐double‐hydroxide electrocatalyst, ZABs based on the asymmetric cathode deliver a small charge/discharge voltage gap (0.81 V at 5.0 mA cm −2 ), a high power density, and a stable cyclability (over 2000 cycles). This 3D reactive interface strategy provides a feasible method for enhancing the air cathode kinetics and further enlightens electrode designs for energy devices involving multiphase electrochemical reactions.
Yu et al. (Wed,) studied this question.