Key points are not available for this paper at this time.
Abstract A facile method to convert biomolecule‐based carbon nanodots (CNDs) into high‐surface‐area 3D‐graphene networks with excellent electrochemical properties is presented. Initially, CNDs are synthesized by microwave‐assisted thermolysis of citric acid and urea according to previously published protocols. Next, the CNDs are annealed up to 400 °C in a tube furnace in an oxygen‐free environment. Finally, films of the thermolyzed CNDs are converted into open porous 3D turbostratic graphene (3D‐ts‐graphene) networks by irradiation with an infrared laser. Based upon characterizations using scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Fourier‐transform infrared spectroscopy, and Raman spectroscopy, a feasible reaction mechanism for both the thermolysis of the CNDs and the subsequent laser conversion into 3D‐ts‐graphene is presented. The 3D‐ts‐graphene networks show excellent morphological properties, such as a hierarchical porous structure and a high surface area, as well as promising electrochemical properties. For example, nearly ideal capacitive behavior with a volumetric capacitance of 27.5 mF L − 1 is achieved at a current density of 560 A L − 1 , which corresponds to an energy density of 24.1 mWh L − 1 at a power density of 711 W L − 1 . Remarkable is the extremely fast charge–discharge cycling rate with a time constant of 3.44 ms.
Strauß et al. (Wed,) studied this question.