Key result
Caliciviruses are susceptible to inactivation by wet heat (>60 °C for ≥30 min), UV-C (≥30 mJ/cm2), high pressure (>200 MPa), and various chemicals, though enteric species resist low pH.
This review summarizes effective physical and chemical methods for inactivating caliciviruses, which is relevant for biopharmaceutical manufacturing and infection control.
Answers are grounded in this paper and cite their sources.
May inform viral clearance in biologics manufacturing; leaves open need for process-specific validation studies.
The Caliciviridae family of viruses contains clinically important human and animal pathogens, as well as vesivirus 2117, a known contaminant of biopharmaceutical manufacturing processes employing Chinese hamster cells. An extensive literature exists for inactivation of various animal caliciviruses, especially feline calicivirus and murine norovirus. The caliciviruses are susceptible to wet heat inactivation at temperatures in excess of 60 °C with contact times of 30 min or greater, to UV-C inactivation at fluence ≥30 mJ/cm2, to high pressure processing >200 MPa for >5 min at 4 °C, and to certain photodynamic inactivation approaches. The enteric caliciviruses (e.g.; noroviruses) display resistance to inactivation by low pH, while the non-enteric species (e.g.; feline calicivirus) are much more susceptible. The caliciviruses are inactivated by a variety of chemicals, including alcohols, oxidizing agents, aldehydes, and β-propiolactone. As with inactivation of viruses in general, inactivation of caliciviruses by the various approaches may be matrix-, temperature-, and/or contact time-dependent. The susceptibilities of the caliciviruses to the various physical and chemical inactivation approaches are generally similar to those displayed by other small, non-enveloped viruses, with the exception that the parvoviruses and circoviruses may require higher temperatures for inactivation, while these families appear to be more susceptible to UV-C inactivation than are the caliciviruses.
No takes yet. Share an insight, caveat, or question.
Nims et al. (2013) conducted a review in Calicivirus contamination. Inactivation methods (heat, UV-C, high pressure, chemicals) was evaluated. Caliciviruses are susceptible to inactivation by wet heat (>60 °C for ≥30 min), UV-C (≥30 mJ/cm2), high pressure (>200 MPa), and various chemicals, though enteric species resist low pH.
Synapse has enriched 10 related papers. Consider them for comparative context: