Key points are not available for this paper at this time.
The steady two-dimensional laminar flow around a stationary circular cylinder has been investigated via a stabilized finite-element method. The Reynolds number Re is based on the cylinder diameter and free-stream speed. The results have been presented for 6 ≤ Re ≤ 40 and the blockages between 0.000125 and 0.80. The blockage B is the ratio of the cylinder diameter to the domain width. There is large scatter in the value of Re s , reported in the literature, marking the onset of the flow separation. From the present study the Re s is found to be 6.29, approximately for B = 0.005. The effect of the blockage on the characteristic flow parameters is found to be insignificant for B ≤ 0.01. The bubble length, separation angle and Re s exhibit non-monotonic variation with the blockage. It is for the first time that such a behaviour for the separation angle and Re s is being reported. Two types of boundary conditions at the lateral walls have been studied: the slip wall and towing tank. In general for high blockage, the results from the slip boundary condition are closer to the ones for the unbounded flow. In that sense, the use of the slip boundary condition as opposed to the towing tank boundary condition on the lateral walls is advocated. The bubble length, separation angle, base suction, total drag, pressure drag, viscous drag and maximum vorticity on the cylinder surface for the steady flow are found to vary as Re , Re −0.5 , Re −1 , Re −0.5 , Re −0.64 , Re −0.60 and Re 0.5 , respectively. The extrapolated results for the steady flow, for higher Re , are found to match quite well with the other results from the literature.
Sen et al. (Mon,) studied this question.