Polymer Recycling and Production of Hybrid Components from Polypropylene and a Thermoplastic Elastomer Using Additive Manufacturing

Due to the significantly increasing demand for plastic components, it has become necessary to investigate polymer recycling solutions to eliminate their adverse environmental impact. The focus of this study is to examine the feasibility of recycling polypropylene and a thermoplastic elastomer up to five times using additive manufacturing. This study also focuses on the production and evaluation of the quality of hybrid components based on polypropylene and thermoplastic elastomers. A thermomechanical recycling approach is used, which involves subjecting polymers to thermal and mechanical processes to obtain a usable material form after each recycling cycle. Additive manufacturing was used to produce specimens using the material in both filament and granular form. The thermal, mechanical, and rheological properties of the specimens were characterized by means of various analytical techniques, including tensile test, impact test, optical microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, dynamic scanning calorimetry, and rheological tests in order to study the degradation characteristics of the recycled polymers. The results generally indicate that the chosen recycling procedure causes only slight alterations in the material properties by means of thermal and rheological tests, while impacting mechanical properties and printability.