Key points are not available for this paper at this time.
Scalmalloy® is an Al-Mg-Sc-Zr alloy designed for the additive manufacturing of components used in various industrial applications. It is primarily used in aerospace and automotive fields due to its low density and high strength. The present brief review aims to outline the state-of-the-art heat treatments currently applied on the as-built Scalmalloy®. The as-built alloy shows yield strength values of 256–278 MPa, ultimate tensile strength of 349–350 MPa, and elongation of 19.0–20.0% due to its bimodal microstructure, which is formed by fine and coarse grain zones. These microstructural features lead to an isotropic behaviour of the mechanical properties. Varying the process parameters, yield strength and ultimate tensile strength can reach values higher than 300 MPa and 400 MPa, respectively, maintaining an isotropic behaviour. After direct aging heat treatment (325 °C × 4 h), the yield and ultimate tensile strength values increase up to 456–469 MPa and 512–521 MPa, respectively, while the strain decreases to 12.0–13.0% due to phase precipitation in the α-Al matrix. Notably, the bimodal microstructure remains largely unchanged. The HIP treatment, carried out at 325 °C × 4 h with a pressure of 1000 bar, reduced the porosity (approximatively 0.18%), resulting in further improvements. The yield strength and the ultimate tensile strength rose to 482–493 MPa and 523–547 MPa, respectively.
Cerri et al. (Sat,) studied this question.