Key points are not available for this paper at this time.
Increasing world energy demand and the rapid depletion of fossil fuels has initiated explorations for sustainable and green energy sources. High-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs) are viewed as promising materials in fuel cell technology due to several advantages, namely improved kinetic of both electrodes, higher tolerance for carbon monoxide (CO) and low crossover and wastage. Recent technology developments showed phosphoric acid-doped polybenzimidazole (PA-PBI) membranes most suitable for the production of polymer electrolyte membrane fuel cells (PEMFCs). However, drawbacks caused by leaching and condensation on the phosphate groups hindered the application of the PA-PBI membranes. By phosphate anion adsorption on Pt catalyst layers, a higher volume of liquid phosphoric acid on the electrolyte-electrode interface and within the electrodes inhibits or even stops gas movement and impedes electron reactions as the phosphoric acid level grows. Therefore, doping techniques have been extensively explored, and recently ionic liquids (ILs) were introduced as new doping materials to prepare the PA-PBI membranes. Hence, this paper provides a review on the use of ionic liquid material in PA-PBI membranes for HT-PEMFC applications. The effect of the ionic liquid preparation technique on PA-PBI membranes will be highlighted and discussed on the basis of its characterization and performance in HT-PEMFC applications.
Seng et al. (Fri,) studied this question.