High-Performance, Self-Powered Photodetectors Based on Perovskite and Graphene

An ideal photodetector must exhibit a fast and wide tunable spectral response, be highly responsive, have low power consumption, and have a facile fabrication process. In this work, a self-powered photodetector with a graphene electrode and a perovskite photoactive layer is assembled for the first time. The graphene electrode is prepared using a solution transfer process, and the perovskite layer is prepared using a solution coating process, which makes the device low cost. Graphene can form a Schottky junction with TiO 2 to efficiently separate/transport photogenerated excitons at the graphene/perovskite interface. Unlike the conventional photovoltaic structure, in this photodetector, both photogenerated electrons and holes are transported along the same direction to graphene, and electrons tunneled into TiO 2 are collected by the cathode and holes transported by graphene are collected by the anode; therefore, the photodetector is self-powered. The photodetector has a broad range of detection, from 260 to 900 nm, an ultrahigh on–off ratio of 4 × 10 6, rapid response to light on–off (<5 ms), and a high level of detection of ∼10 11 Jones. The high performance is primarily due to the unique charge-transport property of graphene and strong light absorption properties of perovskite. This work suggests a new method for the production of self-powered photodetectors with high performance and low power consumption on a large scale.