Comparison of Methods for Estimating Mechanical Properties of Wood by NIR Spectroscopy

Near-infrared (NIR) spectroscopy provides a rapid alternative to traditional methods of wood property assessment. For organizations who assess wood properties on a large scale, multisite, multispecies calibrations are of practical interest. We examined NIR spectroscopy for the estimation of density (at 12% moisture content), modulus of elasticity (MOE), and modulus of rupture (MOR) using clear wood samples obtained from several pine species ( Pinus caribaea var . bahamensis , var. hondurensis , and var . caribaea, P . chiapensis , P . maximinoi , P . oocarpa , P . taeda , and P . tecunumanii ). We compared different methodologies for collecting spectra, that is, benchtop instrument versus benchtop fiber-optic probe and field portable fiber-optic probe, and different wood surfaces (radial and transverse). Calibrations based on the benchtop instrument were superior to those obtained using the fiber-optic probe systems. Difficulty with adequately representing the sample when collecting spectra using a fiber-optic probe and lower quality spectra explain the differences among the data sets. Spectra collected from radial and transverse surfaces provided similar calibration statistics. The calibrations obtained for density ( R 2 = 0.81, SECV = 38.5 kg/m 3 ) and MOE ( R 2 = 0.81, SECV = 1124 GPa) using benchtop instrument spectra demonstrate that it is possible to obtain general calibrations for estimating the wood properties of a number of tropical, subtropical, and temperate pine species.