Surface emission from episide-down short distributed-feedback quantum cascade lasers

Increased coupling is observed in distributed-feedback quantum cascade lasers when placing a shallow second order grating between a continuous surface-plasmon layer and the active region. The combined effect of an air cladding and a metallic layer on the opposite sides of the waveguide increases the overlap with the grating region resulting in calculated coupling coefficients up to 100 cm(-1). The waveguide design was implemented by Au thermo-compression bonding after grating formation and subsequent backside processing of ridges with air claddings. Lasers as short as 176 microm show single-mode behavior with a side-mode-suppression-ratio of 20 dB and thresholds (10 kA/cm(2)) as well as output powers (> 150 mW) close to Fabry-Pérot device performances are reached for 360 microm long devices.