Key points are not available for this paper at this time.
In the territories of the Republic of Uzbekistan, where sandy soils are widespread, it is important to forecast and eliminate the consequences of possible accidents that may arise under the influence of oscillatory movements, taking into account engineering-geological and hydrogeological conditions, during the period of their use as a foundation for the construction of buildings and structures. Therefore, a number of scientists have studied and expressed their opinions on the change in resistance of sandy soils when exposed to vibration. One of the main objectives of the article was to determine the quantitative values of the design resistance R of sandy soils under the influence of vibration movements in natural conditions. To solve this problem, a DU-62 vibratory roller was used to vibrate sandy soils at a test site located in the Termez and Jarkurgan districts of the Surkhandarya region. Before and after the application of vibration using a vibratory roller, vibration behavior data were obtained using a UNI-T UT315A portable vibration meter and the measurement results were processed. As a result, it became clear that when designing buildings and structures in areas with widespread sandy soils, it is necessary to take into account that the calculated resistance of sand under the action of vibration forces decreases by 1.18 times compared to the absence of vibration movements. In this case, if the earthquake results in ground movement, then when designing buildings and structures, the calculated resistance of sandy soils should be increased by 1.18 times.
Kayumov et al. (Mon,) studied this question.