Improved POLSAR Model-Based Decomposition Interpretation Under Scintillation Conditions

Low-frequency synthetic aperture radar (SAR) sensors are prone to ionospheric irregularity structures that affect the amplitude and/or phase of the radar signal. Azimuthal striping caused by amplitude scintillation in SAR data is an initial observation of such effects. In the absence of any physical model and/or technique to mitigate scintillation stripes, we have applied a 2-D fast Fourier transform (FFT) approach for improved interpretation and target identification in fully polarimetric SAR (POLSAR) model-based decomposition scattering powers. Few scenes of fully polarimetric Advanced Land Observation Satellite-Phased Array type L-band Synthetic Aperture Radar (ALOS/PALSAR) and ALOS-2/PALSAR-2 under different ionospheric conditions are acquired and used in this study. As a reference, data sets over the same areas are also acquired on different dates with negligible ionospheric activity (ionospheric quiet day). All the data sets are corrected for the Faraday rotation angle (Ω), which is estimated using the Bickel-Bates approach. Three correction strategies of scintillation-affected model-based scattering power decomposition images are presented. The strategies (zero masking, thresholding, and averaging-post-thresholding) are implemented on 2-D FFT of scattering power images. An intercomparison of corrected decomposition results from the correction strategies demonstrates the capability of 2-D-FFT-based correction strategies to improve the dominant scattering component by 3%-5% for homogeneous terrains. The correction method based on averaging-post-thresholding gives the best results that are further tested by performing a supervised classification. The overall accuracy and kappa coefficient (O A, k̂) of the averaging-post-thresholding technique (72.87%, 0.59) is comparable to those of the reference data (78.74%, 0.69).