Recovery of Tantalum from Waste Tantalum Capacitors by Supercritical Water Treatment

Recycling e-waste has been a significant topic for environmental protection and also for resource recovery. Waste tantalum capacitors (WTCs), widely existing in discarded small appliances, are rich in high quality tantalum (Ta) resources. However, recovering Ta from WTCs is difficult due to the tightly covered mold resin. This study proposes an efficient and environmentally friendly process using supercritical water (SCW) to decompose the organics and recover Ta from WTCs. Two methods of SCW were studied: SCW depolymerization (SCWD) and SCW oxidation (SCWO). The results indicated that the mold resin (packing) of WTCs were effectively decomposed by SCW treatments. The organic decomposition efficiency in SCWD was lower than that in SCWO. The optimal parameters for SCWD and SCWO were, respectively, considered to be 425 °C, 25 MPa, and 120 min and 400 °C, 25 MPa, and 90 min, adding a 10% volume ratio of H 2 O 2 . After SCWO treatment, Ta electrodes were directly recovered, and the purity of Ta could reach 93.18%. For the sample treated by SCWD, Ta powder could be further recovered by mechanical separation. This study presents an efficient and environmentally friendly process to recover Ta from e-waste, which is significant for resource regeneration and environmental conservation.