A Novel Hybrid Removal Technology for High-Aspect-Ratio SU-8 Micromolds in ECF (Electro-Conjugate Fluid) Micropumps Fabrication by UV-LIGA

Previously, we have developed ECF micropumps with triangular prism and slit electrode pairs (TPSEs) fabricated by the UV-LIGA. However, the previous KMPR molds have a limit to attain higher-aspect-ratio TPSEs. As a promising substitute, the ultrathick SU-8 molds are preferable for the TPSEs due to higher-aspect-ratio ability, but their difficult removal remains an annoying problem. To solve this problem, we first propose a novel hybrid removal method combining CO2laser engraving with O2/CF4plasma to achieve the fast, nonswelling, and complete removal of ultrathick SU-8 micromolds for higher-aspect-ratio TPSEs. The CO2laser engraving is utilized as the main process to remove most SU-8, while the O2/CF4plasma is adopted as the post-treatment to remove the remaining SU-8. To gather the proper fabrication conditions, we quantitatively analyze the effects of laser power, laser scan speed, and laser-pass numbers on the SU-8 ablation thickness. We successfully fabricated TPSEs of 590 μm and 970 μm in height by selectively removing SU-8 micromolds of 620 and 1100 μm in thickness. This achievement confirmed that our hybrid removal technology could remove the crosslinked SU-8 effectively and efficiently. We further experimentally proved the fascinating potential of our hybrid removal in improving the output performance of ECF micropumps. This promising hybrid removal opens the door to the easier fabrication of ultrathick metallic microstructures by UV-LIGA. [2017-0320]