A multimode step-index polymer optical fiber has been developed based on a highly crosslinked polycarbosiloxane as the core material and a fluorinated polyolefin (poly(fluoroethylene-co-fluoropropylene)—FEP) cladding layer. The combination offered a system with a high thermal stability, both optically and dimensionally, up to at least 200°C. The polymer optical fiber was produced by injection of a poly(phenylmethylvinylhydro)siloxane crosslinkable prepolymer in an FEP tubing, after which the prepolymer was cured in situ. From attenuation measurements losses as low as 0.98 dB/m at 780 nm were found. The refractive indices of the core material and the cladding are 1.48 and 1.30, respectively. The large difference in refractive index results in a high value for the numerical aperture of 0.70. The prepolymer is a single-component, self-crosslinking, and conveniently processable system. The combination of a low attenuation and easy processability makes these materials very suitable not only for polymer optical fibers, but for all kinds of optical components.
No takes yet. Share an insight, caveat, or question.
Flipsen et al. (1998) studied this question.