The morphology of the spherulitic surface in polyethylene

Studies of lamellar shapes and profiles in linear polyethylene have often been implemented by microscopic examination of appropriately etched random slices through spherulitic specimens. However, since a spherulite crystallized from a bulk specimen is a three‐dimensional assembly of radially oriented lamellae with a twisting orientation (except for very high T c s), it may be difficult to draw appropriate conclusions from a random slice. A technique has been developed that allows one to prepare spherulitic surfaces such that their distance relative to the geometric center can be well characterized. A computer‐based graphical representation is also presented which suggests that the projection of lamellae on such surfaces is adequately represented by a radially oriented assembly of helicoidally twisted lamellae. Based on the agreement between the experimental results and the computer model, it is suggested that the C and S shapes previously observed by other researchers are not necessarily intrinsic to the lamellar profile but may arise due to geometrical effects as the lameliae project onto a surface at various angles. From these results it is also evident that in ringed spherulites lamellae undergo continuous twisting rather than successive misalignment of essentially untwisted segments.