Cross-slot extensional rheometry and the steady-state extensional response of long chain branched polymer melts

Stress-optical measurements at a flow stagnation point in confined geometries such as the cross-slot provide an elegant way to perform extensional testing for polymer melts. This technique is especially useful for samples which have a steady-state that cannot be reached easily in standard elongational rheometry, for example, highly branched polymers which show a nonhomogeneous deformation that occurs in stretching experiments for Hencky strains above 4. In contrast to filament stretching, the cross-slot provides one point at which steady-state extensional flow may be sustained indefinitely. In this study, a Cambridge multi-pass rheometer Coventry, K. D., and M. R. Mackley, J. Rheol. 52, 401-415 2008 is used to generate planar elongational flow in a cross-slot geometry for different polyethylene melts. The experimental results are compared to finite element flow simulations using the multi-mode Pompom constitutive equations. The steady-state elongational viscosity at the stagnation point is computed from the flow-induced stress birefringence and the strain-rate determined from numerical calculations of the flow field. We apply this technique to a range of different branched high-and low-density polyethylene melts. This demonstrates both the effectiveness of this technique and shows how the stress distribution in a complex flow depends on molecular structure. Cross slot extensional rheometry therefore provides a very promising technique for parameterizing molecular constitutive equations for LCB melts.