Double Balloon Technique for Percutaneous Balloon Pulmonary Valvuloplasty: Comparison with Single Balloon Technique

This study was designed to document our results of double balloon pulmonary valvuloplasty and to evaluate if the double balloon technique is preferable to single balloon valvuloplasty in the relief of isolated valvar pulmonic stenosis. Double balloon valvuloplasty in twelve patients reduced the pulmonary valvar gradient from 100.5 ± 28.0 (mean ± SD) to 26.6 ± 12.5 mm Hg (P < 0.001) which remained improved, 17.5 ± 10.2 mm Hg (P < 0.001) at 6 to 14 month follow‐up. Single balloon valvuloplasty with equivalent balloon/pulmonary valve annulus ratios (1.19 ± 0.14 vs 1.19 ± 0.15, P > 0.1) in another 12 patients also reduced (P < 0.001) the gradient from 96.3 ± 40.1 to 28.3 ± 17.3 mm Hg immediately following the procedure which at 6 to 13 month follow‐up was 12.8 ± 9.9 mm Hg. The right ventricular peak systolic pressures (116.6 ± 24.5 vs 113.8 ± 41.5 mm Hg) and pulmonary valvar gradients (100.5 ± 28.0 vs 96.3 ± 40.1 mm Hg) prior to valvuloplasty, residual right ventricular pressures (47.4 ± 12.2 vs 54.3 ± 14.2 mm Hg) and pulmonary valve gradients (26.6 ± 12.5 vs 28.3 ± 17.3 mm Hg) immediately after valvuloplasty, and residual right ventricular pressures (43.1 ± 10.9 vs 41.1 + 12.5 mm Hg) and pulmonary valvar gradients (17.5 ± 10.2 vs 12.8 ± 9.9 mm Hg) on follow‐up were similar (P ± 0.1) in both groups. These data indicate that results of double balloon valvuloplasty are excellent but not superior to single balloon valvuloplasty. It is suggested that the double balloon valvuloplasty should be used if the pulmonary valve annulus is too large to dilate with a single balloon. There is no need for double balloon valvuloplasty if the pulmonary valve can be dilated with a commercially available single balloon.