The use of acrylated fatty acid methyl esters as styrene replacements in triglyceride‐based thermosetting polymers

Resins containing plant oil‐based cross‐linkers were studied with two reactive diluents: a styrene and an acrylated fatty acid methyl ester‐based (AFAME) monomer. Acrylated epoxidized soybean oil and maleinated castor oil monoglyceride were bio‐based cross‐linkers used. The viscosity and mechanical properties of the resulting polymers were measured and analyzed. Both bio‐based cross‐linkers prepared using the modified AFAME as diluent had a fairly high viscosity, so blends of AFAME and styrene were needed to meet the viscosity requirements established by the composite industry (<1000 cP at room temperature). In addition, the glass transition temperature ( T g ) and stiffness of bio‐based cross‐linker/AFAME polymers were significantly lower than the resin/styrene polymers. Ternary blends of maleinated castor oil monoglyceride with AFAME and styrene improved the mechanical properties to acceptable comparable values (storage modulus at 30°C ∼ 1200 MPa and T g ∼ 100°C). The addition of 5 wt% of chemically modified lignin led to an improvement in the mechanical properties of the polymeric matrix but caused an increase in the viscosity. POLYM. ENG. SCI., 2009.