Development of a 400 kJ Nb3Sn superconducting magnet for an SMES system

An Nb3Sn superconducting magnet to store 400 kJ was developed as a unit magnet for a 2.4-MJ SMES system used for stabilization studies of electrical power systems. The superconducting magnet consists of a cryostat and an Nb3Sn coil. The dimensions of the coil are: 340 mm inner diameter, 700 mm outer diameter and 177 mm axial length. The pool-cooled coil is a stack of 20 Nb3Sn double pancakes, and the cooling channels are aligned between pancake coils. To reduce Joule loss in electrical power converters, the maximum operating current of the coil is designed to be 350 A, which is one order of magnitude less than the operating currents of similar scale coils for pulse use. The conductor is an Nb3Sn monolithic conductor with cross section 1.50 × 2.38 mm. For good superconducting stability and high dielectric strength of the coil, the Nb3Sn double pancakes were wound by the react-and-wind technique. Operation of dc current to 105% (367.5 A) of the design operating current was achieved without quench. After the whole of the coil was exposed out of liquid helium, the coil did not quench under 120 A current operation for more than 2 hours. It was verified that the coil was stable for the SMES system.