Removal of Cr (VI) from aqueous solution using magnetic biochar synthesized by a single step method

Magnetic biochar, as an adsorbent, was synthesized by a single step method, where iron salt was directly mixed with pinewood sawdust by chemical co-precipitation and subsequently pyrolyzed at 700°C for Cr (VI) removal from aqueous solution. The effects of some important parameters including adsorbent dosage (0.4–2.8 g/L), pH (1–10) of the solution, contact time (0–1440 minutes), initial concentration (30–120 mg/L), and temperature (20–40°C) were investigated in batch experiments. Both pre- and post-adsorbents were characterized by SEM-EDX and XPS to investigate the adsorption mechanism. The maximum adsorption capacity of the tested magnetic biochar under the certain experimental conditions determined as optimal was 42.7 mg/g for Cr (VI). The adsorption data were proved to be suitable for the pseudo-second order model for kinetics and the Langmuir model for isotherms with correlation R2 = 0.9996 andR2 > 0.9980, respectively, after fitting with four kinetic models (pseudo-first order, pseudo-second order, W-M model, and Elovich) and three isotherm models (Langmuir, Freundlich, and Temkin). The characteristic analyses further verified that the efficient particle was a mixture of iron oxides in essence, and it had a strong effect on the spontaneous and endothermic adsorption process.