Micropollutants are detected in all elements of the environment. Among them, pharmaceuticals are a large group. Advanced oxidation processes are a promising solution for their removal. In this study, the simultaneous removal of four pharmaceuticals (ibuprofen, diclofenac, carbamazepine, and sulfamethoxazole) from aqueous solutions was investigated using the Fenton and photo-Fenton processes. The experimental design used a "one-variable-at-a-time" approach to optimise key operating parameters, including exposure time, pH, hydrogen peroxide dosage, Fe²⁺ source, and H₂O₂:Fe²⁺ ratio. A batch reactor setup was used for all experiments. Optimal removal efficiencies were achieved at pH three and a H₂O₂ dosage of 7.3 mL/L. Photo-Fenton consistently outperformed the Fenton process, achieving complete degradation of sulfamethoxazole, carbamazepine, and ibuprofen within 10 min under optimised conditions. At lower ratios of H₂O₂ to Fe²⁺ (10:1, 20:1), removal efficiency approaches nearly 100 % for all pharmaceuticals when using FeSO₄·7H₂O. In contrast, the iron nanoparticles show reduced efficacy at these ratios. However, at higher ratios (25:1, 50:1, 75:1), the efficiency of reactions FeSO₄·7H₂O decreases and becomes comparable to that achieved with iron nanoparticles. These results highlight the potential of Fenton-based processes, combined with UV radiation and optimised reagent conditions, for the effective removal of pharmaceuticals from wastewater, paving the way for sustainable environmental remediation applications.
No takes yet. Share an insight, caveat, or question.
Całus-Makowska et al. (2024) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: