This publication investigates the control of output voltage-boosting in a Quasi-Z-Source direct matrix converter operating as part of a PMSM drive system with an RLC grid filter. The structure and control algorithms enabling regulation of the converter’s output voltage in both step-down and step-up modes are presented. These methods are based on the dq transformation, which provides a measurement signal for a linear PI-type controller. The article includes simulation results obtained using Matlab Simulink 2019a, which facilitated the preliminary verification of the applied structures and methods. The obtained model revealed the presence of nonlinearities in the Quasi-Z-Source voltage control system, which were subsequently confirmed through experimental verification. The system is stable but exhibits oscillatory behavior, with its parameters dependent on the amplitude of the step of the voltage gain coefficient. The voltage control system regulates the output voltage at least 10 times faster than a single period of the grid voltage sine wave. To enhance voltage control, a tunable controller with optimized parameters was proposed. The conducted studies demonstrated a 16.5% improvement in the IAE index and faster settling time for Quasi-Z-Source voltage control using the proposed controller compared to the reference controller.
No takes yet. Share an insight, caveat, or question.
Siwek et al. (2025) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: