Direct Wet-Spun Single-Walled Carbon Nanotubes-Based p–n Segmented Filaments toward Wearable Thermoelectric Textiles

Three-dimensional thermoelectric (TE) textiles (TETs) fabricated with TE filaments (TEFs) possess merits over other types such as thickness–direction thermal energy harvesting and excellent conformability with dynamic body curves, revealing the prospect of generating electricity for on-body application. Nonetheless, there is still a lack of a costless but scalable method to automatically and seamlessly produce in-series interconnected p–n segmented TEFs with high TE properties via conventional fiber spinning processes. Here, we developed an alternate wet-spinning strategy to continuously manufacture single-walled carbon nanotube-based p–n segmented TEFs at large scale. The TEF with high electrical conductivity (400–800 S cm –1 ) displays a low contact resistivity of 189.8 μΩ cm 2 between the segments and interelectrode, showing 2 orders of magnitude smaller than that reported in the literature. More importantly, the power factors of p -type and n -type segments are 26.25 and 17.14 μW m –1 K –2, respectively, which are 3 and 4 orders of magnitude higher than those of advanced studies. We finally embroidered it into spacer fabric to fabricate a wearable TET, demonstrating an output power density of 501 nW m –2 at Δ T = 27.7 K. The methodology can inspire the development of fiber-based electronics such as wearable TEs and diodes and so forth.