Physical properties of polyhedral oligomeric silsesquioxanes–cycloolefin copolymer nanocomposites

Properties of cycloolefin copolymer (COC)–polyhedral oligomeric silsesquioxanes ( POSS) nanocomposites, prepared by melt compounding, have been investigated. Composites retained the optical transparency of the matrix up to a nanofiller content of 5 wt %. whereas for higher percentages the formation of a crystalline phase, due to the presence of agglomerated nanoparticles, was revealed by X‐Ray diffraction (XRD). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) evidenced a significant decrease of the glass transition temperature ( T g ) and of the thermal decomposition rate, with the POSS content. Similarly, at increasing filler content, both quasi‐static tensile tests in the solid state and rheological measurements on melts showed a decrease of measured parameters (elastic modulus, ultimate elongation, loss and storage shear modulus, viscosity). These results were attributed to the formation of a soft interphase at the nanoparticles/polymer boundary due to the presence of isobutylic groups on POSS nanoparticles that limited the stress transfer process and acted in the COC matrix as a molecular lubricant agent. A small increase of the receding contact angle with the nanofiller content was also detected from dynamic contact angle (DCA) measurements.