Electrochemical Etching of Indium Phosphide Surfaces Studied by Voltammetry and Scanned Probe Microscopes

Using voltammetry, X-ray photoemission spectroscopy (XPS), in situ electrochemical scanning tunneling microscopy (STM), ex situ atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements, electrochemical etching modes for n -InP surfaces were investigated and optimized for uniform and controlled etching in an HCl electrolyte. The voltammograms indicated the presence of active and passive regions. The surfaces obtained in the active region were clean and featureless with an rms roughness of 1.8 nm. On the other hand, the oxide covered surfaces obtained in the passive region were nonuniform and porous. Etching characteristics of the d.c. photo-anodic mode and the pulsed avalanche mode were then investigated and compared. Both modes were found to be highly controllable and produced uniform and clean surfaces, consuming eight holes per molecule of InP. In particular, the pulsed avalanche etching mode realized an extremely high etch depth controllability of 3×10 -5 nm/pulse.