Topology Comparison of Superconducting Generators for 10-MW Direct-Drive Wind Turbines: Cost of Energy Based

This paper aims at finding feasible electromagnetic designs of superconducting synchronous generators (SCSGs) for a 10-MW direct-drive wind turbine. Since a lower levelized cost of energy (LCoE) increases the feasibility of SCSGs in this application, 12 generator topologies are compared regarding their LCoE in a simplified form of levelized equipment cost of energy (LCoEeq). MgB2wires are employed in the field winding. Based on the current unit cost and critical current density capability of the MgB2wire at 20 K, the topologies with more iron have a much lower LCoEeqthan the topologies with more nonmagnetic cores. The fully iron-cored topology with salient poles has the lowest LCoEeq. Then a scenario study shows that the difference of LCoEeqbetween the topologies will become much smaller when the unit cost of the MgB2wire drops to a quarter and the current density capability of the MgB2wire increases to four times. Then the topologies with more nonmagnetic cores will become comparable to those with more iron. Aiming at a lower LCoEeq to increase the feasibility of SCSGs for large wind turbines, those topologies having the most iron in the core are the most promising for both now and the long term. If low weight is required, the topologies with more nonmagnetic cores should be considered.