Combined dynamic scanning tunneling microscopy and frequency modulation atomic force microscopy investigations on polythiophene chains on graphite with a tuning fork sensor

Polythiophene molecules adsorbed on a highly oriented pyrolytic graphite surface were studied by combined dynamic scanning tunneling microscopy (STM) and frequency modulation atomic force microscopy (FM-AFM) with a quartz tuning fork sensor operating in Qplus mode and equipped with a Pt/Ir tip. Upon completing a careful sub-angström oscillation amplitude calibration of the probe, experiments were conducted in an ultra high vacuum at room temperature. By selecting the tip/surface distance regulation parameter, one can select the type of simultaneous information obtained in an area. For distance regulation based on the mean tunneling current, dynamic STM images together with maps of tip/surface force gradient were obtained. FM-AFM images with maps of the tunneling current were also acquired when the distance regulation was based on the frequency shift. Comparison between these images reveals interesting features. For example the tip which operates in STM mode with ultra low current (<10 pA) generates different interaction forces above molecules or graphite. Changes in energy dissipation processes as small as tens of millielectronvolts per cycle were recorded when the tip oscillates above the polymer or on the graphite surface. Hence data demonstrates that a stiff piezoelectric tuning fork of several kilonewtons/meters working as an AFM/STM probe with sub-angström amplitude can characterize weakly adsorbed molecules.