PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
June 1, 1986Journal of the Atmospheric Sciences330 citations

Length Scales in the Convective Boundary Layer

View Full Paper
DLDonald H. LenschowBSB. B. Stankov

Key Points

Key points are not available for this paper at this time.

Abstract

We calculated integral scales for horizontal and vertical velocity components, temperature, humidity and ozone concentration, as well as for their variances and covariances from aircraft measurements in the convective atmospheric boundary layer over both ocean and land surfaces. We found that the integral scales of the second-order moment quantities are 0.67± 0.09 that of the variables themselves. Consequently, only the second-order moment integral scales are presented here. These results are used to calculate the averaging lengths necessary to measure second-order moment quantities to a given accuracy. We found that a measurement length of 10 to 100 times the boundary-layer height is required to measure variances to 10% accuracy, while scalar fluxes require a measurement length of 102 to 104 and stress a measurement length of 103 to 105 times the boundary layer height. We also show that the ratio of the wavelength of the spectral peak to the integral scale can be used to estimate the sharpness of the spectral peak.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Lenschow et al. (1986) studied this question.

synapsesocial.com/papers/6a8139a9b06901c4fb22d46ahttps://doi.org/10.1175/1520-0469(1986)043<1198:lsitcb>2.0.co;2
Ask AI
Helpful
Bookmark
Share
View Full Paper