Structure and physical properties of biaxially stretched polyethylene terephthalate sheet after heat‐setting

This is the authors' abstract. We don't add key points for this paper.

The consumption of hot‐fillable poly(ethylene terephthalate) bottles is extremely large and is still increasing in Japan. This type of bottle is generally manufactured by the heat‐set method using hot molds after stretch‐blow molding. In this study, the method is simulated using a setting application in which sheets can be stretched constraining their sizes on a hot aluminum block. The crystallinities of the sheets are found to depend on the thermal history, i.e., the duration and temperature of the heat‐set cycle. Heat‐setting mitigates thermal‐shrinkage of the sheets which is due to the increase in crystallinity or in the tense segments in the amorphous region. The structure of the heat‐set sheet varies depending on the original stretched sheet. For a sample of low draw ratio, the crystallinity does not increase because of the heat‐set. For a sample of medium draw ratio, the crystallinity increases greatly and the tense segments in the amorphous region also increase because of heat‐set. For a sample of high draw ratio, the crystallinity increases a little but the numbers of the crystallite and tense segments in the amorphous region do not change with the heat‐set.