Thermomechanical forcing of deep rock slope deformation: 2. The Randa rock slope instability

[1] Deformation monitoring between 2004 and 2011 at the rock slope instability above Randa (Switzerland) has revealed an intriguing seasonal trend. Relative dislocation rates across active fractures increase when near-surface rock temperatures drop in the fall and decrease after snowmelt as temperatures rise. This temporal pattern was observed with different monitoring systems at the ground surface and at depths up to 68 m, and represents the behavior of the entire instability. In this paper, the second of two companion pieces, we interpret this seasonal deformation trend as being controlled by thermomechanical (TM) effects driven by near-surface temperature cycles. While Part 1 of this work demonstrated in a conceptual manner how TM effects can drive deep rock slope deformation and progressive failure, we present here in Part 2 a case study where temperature-controlled deformation trends were observed in a natural setting. A 2D discrete-element numerical model is employed, which allows failure along discontinuities and successfully reproduces the observed kinematics of the Randa instability. By implementing simplified ground surface temperature forcing, model results were able to reproduce the observed deformation pattern, and TM-induced displacement rates and seasonal amplitudes in the model are of the same order of magnitude as measured values. Model results, however, exhibit spatial variation in displacement onset times while field measurements show more synchronous change. Additional heat transfer mechanisms, such as fracture ventilation, likely create deviations from the purely transient-conductive temperature field modeled. We suggest that TM effects are especially important at Randa due to the absence of significant groundwater within the unstable rock mass.