Wafer–to–wafer transfer process of barium strontium titanate for frequency tuning applications using laser pre-irradiation

This paper describes laser-assisted film transfer technology for barium strontium titanate (BST) deposited on a sapphire substrate. BST is a promising ferroelectric material for varactors, which are required for frequency-tunable RF applications. However, the deposition temperature of BST (600 ~ 700 °C) is too high for surface acoustic wave (SAW) substrates. In this study, BST grown on a sapphire substrate at 650 °C was transferred at low temperature (140 °C) to a borosilicate glass substrate as well as a LiTaO 3 substrate. The transferred BST films were characterized as tunable capacitors. A key process in the BST film transfer technology is the laser pre-irradiation of a buffer Pt layer beneath BST from the backside of the sapphire substrate to weaken the BST-to-Pt adhesion. The mechanism of delamination at the BST/Pt interface is discussed using a simple 1D heat transfer model.