Preparation and Performance Characterization of Copper and Diamond Filled Composite Thermal Conductivity Materials

This is the authors' abstract. We don't add key points for this paper.

An experiment investigation was conducted to prepare and study the thermal conductivity performance of copper and diamond composite materials. Copper powder and diamond particles were used as fillers, epoxy resin was used as matrix, and composite materials were prepared by vacuum-assisted mechanical stirring. The thermal expansion coefficient of different composite materials was measured by a laser flash method, which can be used to calculate the thermal conductivity. The effect of the filling rate of copper powder, the morphology of copper powder, the filling rate of diamond, and the thermal conductivity of the particles on the thermal conductivity of composite materials was studied. The results showed that thermal conductivity of copper powder and diamond particles composite materials are 874% and 535% higher than that of the epoxy resin when their filling rates were 50.3 vol.% and 40.0 vol.%, respectively. For two-dimensional flake copper powder materials, the thermal conductivity could be effectively improved at a lower filling rate. However, the flake particles were easy to aggregate at a high filling rate, which is not conducive to the thermal conductivity of the composite materials.