Holes with diameters of a few nanometers were drilled in a stainless steel foil using intense electron beams of 2.4nm nominal probe size from a field-emission electron gun in a high-resolution transmission electron microscope. Drilling experiments were carried out at regions of different foil thicknesses for different durations using three different condenser lens apertures. A better understanding of the mechanisms of nano-hole drilling by nano-probe electron beams has been achieved in this article. It was observed that the drilling process initiates from the bottom surface of a thin region while it initiates from the top surface for a thick region. It is concluded that material removal during nano-hole drilling is mainly by localized vaporization within the foil and drilling progresses through the formation of a row of interconnected nano-voids along the irradiated volume across the foil thickness.
No takes yet. Share an insight, caveat, or question.
Bysakh et al. (2004) studied this question.